| |
HIGH PRESSURE TRIPLEX PLUNGER PUMPS, ROTARY GEAR PUMP, FUEL INJECTION INTERNAL GEAR PUMP |
- Simple and Sturdy Construction
- Volumetric efficiency as high as 95%
|
|
|
Capacity: Maximum upto 25m3/hr
Pressure maximum: upto 800kg/cm2
MOC: SS316, SS304, CL, Brass
Applications : High Pressure Jetting. Cleaning, Descaling, Boiler Feed, etc
|
 |
BACK |
- Simplicity of design, easy for maintenance
- Can Pump all type of media, low & high viscocities (upto 100,000 CST), abrasive slurries, solids in suspention upto 60%.
- Negative suction equivalent to 8 MWC.
- Can pump from Vacuum & mediums containing gas can also be pumped.
- Vulcanised stator simply to be changed.
- Maximum permissible solid content up to 50 %.
- Steady flow without pulsations, minimum turbulence
- Can be installed horizontally, vertically or at any angle without heavy foundation
|
|
Capacity : upto 250 M3/HR
Pressure : upto 15 Kg/CM2
MOC : CI, CS, SS 304, SS 316, Brass, etc.
Applications : Loading and Unloading of Tankers, Transfer of Liquids like Molasys, Pastes, Slurries, Fruit Pulp, Fruit Juice, Cream, Glucose, Ink, Paint, Soap, Honey, Resins, Etc.
|
|
BACK |
|
Pump medium contacts only Tubing and not pump - No cross-contamination.
Self priming and safe dry running,
No valves, seals-maintenance free.
No back flow or siphoning, accurate flow
Microprocessor based control circuits.
Precise PWM based DC step motor drive.
Menu driven LCD readout for flow rate, RPM and time selection.
Advanced EEPROM technology without any battery backup (Memory retention of the stored parameters for more than five years)
Speed variation by means of a potentiometer or external 4-20 mA current signal with digital display readout.
Operates of 230 V, 50 Hz, Single Phase AC.
OEM units, Multi-Channel units, Composite Sampler units & Automatic Filling Station units are offered. |
Capacity : Minumum range : 0.12 ml/hr to 60 ml/hr
Maximum range : 50 ltr/hr to 3000 ltr/hr
Applications : Varied application in Pharmaceuticals, Food Processing, Chemicals, Ink & Pigments, Ideal for abrasive and aggressive fluids, Cell Culture, Filtration and Separation, Pollution Control, Beverage dispensing, Photo processing and printing, Fermentation, Heat treatment plants for Filling, Dosing, Sampling and Dispensing.
|
| |
BACK |
| |
|
|
|
Sturdy Construction, Simple Design, Low Noise, Reliable & Low Cost.
Built in Pressure Relief Valve.
Double protection with Oil Seal & Gland Packing.
Capacity : 10 LPM to 500 LPM
Pressure : Upto 10 KG/CM2
MOC : CI, SS, Bronze, etc.
Applications : Loading & Unloading of Tankers, Transfer of all kind of Oils, Paints, Inks, Bleaches, Hot Grease, Kerosene, Dyes, etc.
|
| |
Internal Lubrication System.
Available with or without Built-in Pressure Relief Valve & External by Pass.
Mech. Shaft seal preventing lequage of liquid.
Self Inducing.
Capacity : 150 LPH to 6000 LPM
Pressure : upto 30 KG/CM2
MOC : CI
Applications : Boilers, Oil Burners, Hydraulic Drive, Booster for Diesel Locomotive, Force Feed Lubrication, Filter Pumping. Suitable for transfer of LDO, FO, HSD, LSHS, etc. |
|
|
|
|
|
 |
