| |
|
|
|
|
 |
BACK |
PLUNGER TYPE PUMPS
|
- Precise Metering Device.
- Multiple head plunger pumps with common drive for mixing two or more liquids in a desired ratio. The ratio can be easily reset.
- Liquid heads can be heated by hot water/ steam/ power to transfer/ dose products which are highly viscous at room temperature.
- The Attachment "AUTOFLOW CONTROLLER" can be Installed in the pumps which recieves 4 to 20 mA Signal from the Process and Commands the Dosing Pump to vary the Flow as per the Requirement of the Process.
- GMP Models available for Food & Pharma applications.
- The design & Performance of Plunger Pumps conforms to API 675.
|
|
|
Capacity: 0 - 10,000 LPH
Pressure : Upto 400 kg/cm2
MOC : AISI 304, AISI 316, Hastalloy B, Hastalloy C, etc.
Applications : Hydro testing, Polyelectrolytes, Caustic, Lime, Soap, Acids, Boiler Chemicals, Cooling Water Chemicals, Gel, Cream, Toothpaste, Butter, Chocolate, Etc.
NOTE : Please Refer SYSTEMS Section For Chemical Dosing Systems.
|
| |
- Diaphragm is always balanced between the pressure exerted by the hydraulic oil and the liquid to be dosed. Longer diaphragm life.
- Automatic air bleeding from the hydraulic oil ensures better metering accuracy
- Arrangement of in-built pressure relief valve to protect the pump from pressure exceeding the rated pressure.
- Rupture Indication Arrangement (RIA) is an additional facility available with this pumps. These pumps with RIA are proved with sandwitch of two diaphragms. The rupture of any one of the diaphragm can be sensed by pressure sensing device.
- The design and performance of pumps conforms to API 675.
|
|
|
Capacity : 0 - 7000 LPH. Capacity can be varied from 0 to Maximum
Pressure : upto 100 KG/CM2
MOC : AISI 304, AISI 316, Monel, Alloy 20, Alloy 20, Hastalloy B, Hastalloy C, Titanium, Polyproppylene, PTFE, GFT. Diaphragm in PTFE
Applications : 100% leaque free Chemical Dosing, PAC, Toxic Liquids, Hazardous Liquids, Solvents, Paint, Slurries, Corrosive Liquids & Acids etc.
|
- Simple design
- Steady state accuracy upto +/- 2%
- Accuracy at repeatability +/- 3%
- Well suitable for continuous duty
|
|
Capacity : 0 – 250 LPH
Pressure: 5 KG/CM2
MOC : SS316, PP, PVDF, SS304, PTFE/GFT. Diaphragm in PTFE
Applications : Leaque free Chemical Dosing, ETP, WTP, etc.
|
- Electronically operated mechanically actuated Diaphragm
- Adjustable Stroke Length
- Compact Size, light weight, more robust structure.
- Solenoid Drive with Minimum moving parts
|
|
|
Capacity :- 0 – 20 LPH
Presssure: upto 7 KG/CM2
MOC : PP, SS 304, SS 316
Applications : Small quantity chemical dosing, RO Plant, etc. |
|
|
|
|
|
 |
